1. Starter Kit S3 for Avisaro WLAN Module 2.0
(WiFi-ISM-BT modules/WiFi modules)

...511M A complete kit for easy and fast development with WLAN Module 2.0 module. It includes all necessary components like WiFi/WLAN antennas, cables, connectors). WiFi Module: WLAN Modul...

2. WLAN Starter Kit for Roving RN-131
(WiFi-ISM-BT modules/WiFi modules)

... STK-WXX-20131 A complete kit for easy and fast development with RN131 module. It includes all necessary components like WiFi/WLAN antennas, cables, connectors). WiFi Module: RN131 ...

3. Starter Kit Bluetooth for KC21
(WiFi-ISM-BT modules/Bluetooth modules)

...E-KC21 A complete kit for easy and fast development with KC21 module by Telit. It includes all necessary components like Bluetooth antennas, cables, connectors). Bluetooth EVK inc...

4. Starter Kit Bluetooth for KC22
(WiFi-ISM-BT modules/Bluetooth modules)

...E-KC22 A complete kit for easy and fast development with KC22 module by Telit. It includes all necessary components like Bluetooth antennas, cables, connectors). Bluetooth EVK inclu...

5. Bluetooth Starter-Kit for AMB2300
(WiFi-ISM-BT modules/Bluetooth modules)

...NC4 A complete kit for easy and fast development with AMB2300 module by Telit. It includes all necessary components like Bluetooth antennas, cables, connectors). Bluetooth EVK inclu...

6. Development Platform and RF Design Origin GPS 1315
(GPS/Evaluation Kits)

A complete kit for easy and fast development with ORG-1315 module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: ORG-1315 GPS/GNSS EVK include

7. Development Platform and RF Design Origin GPS 2000
(GPS/Evaluation Kits)

A complete kit for easy and fast development with ORG-2000 module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: ORG-2000 GPS/GNSS EVK i

8. Development Platform and RF Design Origin GPS 1318
(GPS/Evaluation Kits)

A complete kit for easy and fast development with ORG-1318 module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: ORG-1318 GPS/GNSS EP in

9. Development Platform and RF Design Origin GPS 1308
(GPS/Evaluation Kits)

A complete kit for easy and fast development with ORG-1308 module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: ORG-1308 GPS/GNSS EP includes

10. Development Platform and RF Design GPS 3A
(GPS/Evaluation Kits)

A complete kit for easy and fast development with AarLogic GPS 3A module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: AarLogic GPS 3A

11. Development Platform and RF Design GPS 3T
(GPS/Evaluation Kits)

A complete kit for easy and fast development with AarLogic GPS 3T module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: AarLogic GPS 3T

12. Development Platform and RF Design GPS 3M
(GPS/Evaluation Kits)

A complete kit for easy and fast development with AarLogic GPS 3M module. It includes all necessary components like GSM antennas, cables, connectors). GPS Module: AarLogic GPS 3M

13. GPS and GPRS with Embedded Linux
(News/Product News)

...ad-band GPRS module and SiRF3 GPS module are also on board, as well as interfaces for USB, RS232 and Ethernet components. An SD-card reader enables the trouble-free expansion of the 4 Mb of RAM which ...

14. How to order ?
(Ordering Information/Ordering Info)

...racking number by e-mail Please indicate if you request a confirmation of your order. Should we not have the components you have ordered in stock we will contact you. 1.8 How to ask for the status o...

15. Rapid prototyping
(Support & Services/Rapid Prototyping Enclosure)

... service and the necessary wireless modules (GPRS, UMTS, CDMA, GPS, Bluetooth, WIFI or ISM). Other needed components like SIM cardholders, microphones, speakers or batteries can be supplied as wel...

16. Selecting the right antenna
(Tech. Info/Info Antennas)

...wing guideline for the antenna.     Some simple rules remain equal like: • ·Non-metal components in vicinity of the antenna. What is near differs by the different antenna des...

17. Designing your first PCB
(Tech. Info/Info Antennas)

  On your first PCB you should mount the recommended components for matching circuit. In the later period of the development, you can then optimise the matching circuit. For first trial so

18. PCB in final stage
(Tech. Info/Info Antennas)

  If the PCB with antenna design-in and all other components in a final stage you should start with developing the matching circuit. Final stage means final PCB and final enclosure. Think

19. Imprint
(imprint/imprint)

Verantwortlich für den Inhalt im Sinne des MDStV: Aldacom GmbH Hans-Boeckler-Strasse 16 63263 Neu-Isenburg/Germany E-Mail: infos@aldacom.com Internet: www.aldacom.com USt.-Id Number: DE25835

20. Enhanced services Design in aid for embedded antennas
(Tech. Info/Case Studies)

...end the following guideline for the antenna.     Some simple rules remain equal like: • ·Non-metal components in vicinity of the antenna. What is near differs by the different antenna desig...

21. Antenna technology basics
(Tech. Info/Info Antennas)

...n free field conditions. A real application might not have enough ground plane and will always have other components close to the antenna. Optimisation can be obtained by measurement on your p...

22. PCB GSM / UMTS / Bluetooth Antenna ANT-GXP114
(Antennas/PCB antenna)

..., the casing should be made of plastic. The casing should NEVER contain carbon. The minimum distance to metal components should be 40 mm. You will get the best performance using a distance of 80 mm. ...

23. PCB GSM / UMTS / Bluetooth Antenna ANT-GXP117
(Antennas/PCB antenna)

..., the casing should be made of plastic. The casing should NEVER contain carbon. The minimum distance to metal components should be 40 mm. You will get the best performance using a distance of 80 mm. ...

24. PCB GSM / UMTS / Bluetooth Antenna ANT-GXP116
(Antennas/PCB antenna)

..., the casing should be made of plastic. The casing should NEVER contain carbon. The minimum distance to metal components should be 40 mm. You will get the best performance using a distance of 80 mm. ...

25. PCB GSM / UMTS / Bluetooth Antenna ANT-GXP115
(Antennas/PCB antenna)

..., the casing should be made of plastic. The casing should NEVER contain carbon. The minimum distance to metal components should be 40 mm. You will get the best performance using a distance of 80 mm. ...

26. PCB GSM Antenna ANT-GXP401
(Antennas/PCB antenna)

..., the casing should be made of plastic. The casing should NEVER contain carbon. The minimum distance to metal components should be 40 mm. You will get the best performance using a distance of 80 mm. ...

27. Kontakt
(Kontaktdaten/Kontaktdaten)

Aldacom GmbH Hans-Boeckler-Strasse 16 63263 Neu-Isenburg/ Germany ----------------------------------- Tel: English: +49 (0) 6103 37214110 ----------------------------------- Tel: Deutsch, Svenska : +4

28. Company Profile
(Company Profile/Company Profile)

...andinavian). Our aim is to surprise, delight and even excite you, our customer, by offering the best wireless components at the lowest possible investment. Aldacom was set up back in 2007 because we ...

29. Beispiel FAQ-Element 1
(FAQs/Beispiele)

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. Lorem ipsum dolor sit amet, consetetur sa

30. Beispiel FAQ-Element 2
(FAQs/Beispiele)

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. Lorem ipsum dolor sit amet, consetetur sa

31. WLAN PCB Antenna Single Band 2400 ANT-BXP6611
(Antennas/WIFI Bluetooth ZIGBEE ISM)

..., the casing should be made of plastic. The casing should NEVER contain carbon. The minimum distance to metal components should be 40 mm. You will get the best performance using a distance of 80 mm. ...